ELECTROLINE® & TUFLOC Products > ELECTROLINE® – Architectural Railing Assemblies  
 

ELECTROLINE® – Architectural Railing Assemblies


Click on a Product to view details.

CE-418-425-ST

Classic Turnbuckle with Eye Post Assembly

(2)
This tensioning fitting can be used for stairways and longer, straight runs of cable where take-up is required to obtain proper tension. The turnbuckle will self-adjust for stairs or angled runs. An Eye Post Assembly is included.
CE-218-225-THD

Fixed Eye with Threaded Tab Assembly

(2)
This non-tensioning fitting is used for stairways and angled runs. A Threaded Tab is included with this Eye Fitting Assembly.

Posts must be drilled and tapped to incorporate the threaded tab. This fitting can only be used when a minimum wall thickness of .250 in is maintained. The hole must be drilled with an offset of 1/4” to maintain axial alignment for the threaded tab.
CE-218-225-FT

Fixed Eye with Eye Post Assembly

(2)
This non-tensioning fitting is used for stairways and angled runs. An Eye Post Assembly is included with this Eye Fitting Assembly. The hole must be drilled with an offset of 1/4” to maintain axial alignment for the fixed tab.
CE-418-425

Turnbuckle Stud Assembly

(4)
This tensioning fitting is used for stairways with runs of moderate length. For a clean look, the fitting is assembled inside the post. For assemblies with wooden posts, fender washers are necessary.
CE-318-325

Fixed Stud Assembly

(2)
This non-tensioning fitting is used for straight runs. For assemblies with wooden posts, fender washers are necessary.
CE-418-425-CEM

Classic Turnbuckle for Cement Posts

(2)
This tensioning fitting is used to obtain a more substantial architectural look or for longer, straight runs of cable where a lot of take-up is required for proper tension. This fitting is threaded into cement posts with a drop-in anchor system.
Image

Replacement Parts

(22)

Search by Attribute  Replacement Parts - 22 Items

Image

Accessory

(5)
© Esmet, Inc., All Rights Reserved